Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Utility" menu by pressing
the [Menu Up] key or [Menu Down]
key.
Step 3
Press the [ENTER] key to confirm the
"Utility" menu and shift to the next
level.
Step 4
Bring up the "Dump" item by pressing
the [Menu Up] key or [Menu Down]
key.
Step 5
Select "Start/End" or "All" by pressing
the [Menu Up] key or [Menu Down]
key.
Step 6
Press the [ENTER] key to confirm
Dump mode.
Step 7
Send printing data from the host com-
puter. print with Dump Mode.
Step 8
To terminate Dump Mode, press the
[CANCEL] key.
Step 9
Do not press any other keys for 3 min-
utes or press [Back] key again.
Utility Settings: Dump
70
RJ-6000 Series USER GUIDE Functions Edition
Plot OK
*Menu* Command>
*Menu* Ut i l i t y>
ErrorDi spl ay:Of f
Dump : S t a r t / End
Dump : A l l
** Dump Mode **
** Dump Mode **
*Menu* Ut i l i t y>