Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Command" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Display a Command item by pressing
the [Menu Up] key or [Menu Down]
key.
Step 4
Specify “MHGL, GL2”, “MH-GL2” or
“RTL-PASS” by pressing the [VALUE +]
or [VALUE -] key.
Step 5
Press the [ENTER] key to confirm
"Command" setting and shift to the
next item to be set.
Step 6
If no other items are to be changed,
press the [Back] key.
Step 7
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 8
The permanent display is restored.
Command Settings: Command
33
RJ-6000 Series USER GUIDE Functions Edition
How to Set Parameters
Plot OK
*Menu* Command>
*Menu* Command>
Command :MHGL ,GL2
Command :RTL - PASS
PlotArea: Normal
*Menu* Command>
Plot OK