Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Function" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Function" menu and shift to the next
level.
Step 4
Bring up the "Media cut" item by
pressing the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
to specify "Off", "Auto" cut or "Manual"
cut.
Step 6
Press the [ENTER] key to confirm
"Media Cut" and shift to the next item
to be set.
Step 7
If no other items are to be changed,
press the [Back] key.
Step 8
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 9
The permanent display is restored.
Function Settings: Media Cut
49
RJ-6000 Series USER GUIDE Functions Edition
How to Set Parameters
Plot OK
*Menu* Command>
*Menu* Funct i on>
InkDryTime: 30s
MediaCut: Auto
Med i aCu t : Manua l
Copy : 1
Plot OK
*Menu* Funct i on>