Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Function" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Function" menu and shift to the next
level
Step 4
Bring up the "Dist. Adj." item by press-
ing the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
to set "Change".
Step 6
Press the [ENTER] key to confirm the
"Distance Adjustment" submenu and
shift to the next level.
Step 7
Press the [Menu Up] key or [Menu
Down] key to shift to the panel for
changing "Distance Adjustment X-axis
Data". the value that is displayed
becomes the currently set value. If no
setting is to be made, it will be the
width of the previously printed docu-
ment. An underline shows the digit to
be altered.
Function Settings: DistanceAdjustment
52
RJ-6000 Series USER GUIDE Functions Edition
Plot OK
*Menu* Command>
*Menu* Funct i on>
InkDryTime: 30s
Dist .Adj : No
Dist .Adj : Change
Data X: 00841.00