Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Centronics" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Centronics" menu and shift to the next
level.
Step 4
Bring up the "Mode" item by pressing
the [Menu Up] key or [Menu Down]
key.
Step 5
Press the [VALUE +] or [VALUE -] key
to switch to "Centro" or "Bi Centro".
Step 6
Press the [ENTER] key to confirm
"Mode" and shift to the next item to be
set.
Step 7
If no other items are to be changed,
press the [Back] key.
Step 8
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 9
The permanent display is restored.
Centronics Settings: Mode
55
RJ-6000 Series USER GUIDE Functions Edition
How to Set Parameters
Plot OK
*Menu* Command>
*Menu* Cen t ro>
Mode : Cen t r o
Mode : Cen t r o
Mode : B i Cen t r o
Timing: A-B
*Menu* Cen t ro>
Plot OK