Filter
Top Products
Data errors occur when there is a fault in communication between the printer
and the computer. There are three types of data error:
• Errors related to communication conditions
• Errors caused by faulty handshaking
• Escape sequence command format errors
The beeper gives three long beeps when a data error occurs.
• The command that caused the error may be shown enclosed in
brackets in the data error message.
Network board detection error
A board other than a prescribed net-
work interface board has been
installed. Replace with a prescribed
network interface board.
(See page 80)
Network board initialization error
An error occurred when the network
interface board was installed. The net-
work interface board may be faulty.
Replace the network interface board.
(See page 80)
Data Error Display and Countermeasures
91
RJ-6000 Series USER GUIDE Functions Edition
Details of the Display
NOTE
Netw. Check Er r
Netw. Init . Err