Filter
Top Products
A messaged error impedes the operation of the printer. Sometimes an error is
displayed and printing continues or printing may cease when an error is dis-
played. If printing stops, it will be reprinted when the cause of the error is
removed.
When a messaged error occurs, the beeper will beep twice unless there is
insufficient memory.
Capping position not set
The capping position is not recorded.
The error will not be cancelled until the
capping position is adjusted. Contact
your local Mutoh dealer regarding cap-
ping position adjustment.
Media recognition error
An error has occurred during media
detection.
Either media smaller than the minimum
size or larger than the maximum size
was detected or the hold lever was up
or a media jam occurred during media
detection. This error also occurs if the
media is not loaded in the correct posi-
tion. Put the hold lever up and reload
the media.
(See Basic Edition page 38, 41)
Media skew error
Roll media has slipped obliquely.
Reload the media.
(See Basic Edition page 41)
Media replacement error
Roll media cutting failed. Cut the
media, raise the hold lever and reload
the media.
(See Basic Edition page 41)
Messaged Errors and Countermeasures
88
RJ-6000 Series USER GUIDE Functions Edition
No Cap Pos i t i on
Undef ined Paper
Paper Sl ant
Paper Cut Er ror