Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Command" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Command" menu and shift to the next
level.
Step 4
Bring up the "Resolut." item by press-
ing the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
to select "360dpi", "720dpi" or
"300dpi".
Step 6
Press the [ENTER] key to confirm
"Resolution" and shift to the next item
to be set.
Step 7
If no other items are to be changed,
press the [Back] key.
Step 8
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 9
The permanent display is restored.
Command Settings: Resolution
37
RJ-6000 Series USER GUIDE Functions Edition
How to Set Parameters
Plot OK
*Menu* Command>
*Menu* Command>
Command :MHGL ,GL2
Resolut.: 360dpi
Resolut.: 720dpi
On l i neT ime r : 30s
*Menu* Command>
Plot OK