Filter
Top Products
4–16 Maintenance and Service Guide
Removal and replacement procedures
Memory module
Expansion memory module
Before removing the expansion memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
Remove the expansion memory module compartment cover.
1. Position the computer upside down, with the front toward you.
2. Loosen the Phillips PM2.0×5.0 captive screw 1 that secures the memory compartment cover to the computer.
3. Lift the left side of the cover 2 to remove it from the computer.
The memory module compartment cover is included in the plastics kit, spare part number 594091-001.
Description Spare part number
4096-MB memory module (PC3-10600 DDR3 1333-MHz) 599092-001
2048-MB memory module (PC3-10600 DDR3 1333-MHz) 598856-001
1024-MB memory module (PC3-10600 DDR3 1333-MHz) 598859-001