Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–19
6. Lift the rear edge of the keyboard and slide the keyboard back until it rests on the switch cover and display.
Remove the primary memory module:
✎
Primary memory is under the keyboard. Expansion memory is in the expansion memory compartment on the
bottom of the computer.
1. Pull away the retention clips 1 on each side of the memory module to release the memory module. (The
memory module tilts up.)
Ä
CAUTION: The memory module is electrostatic sensitive. To prevent damage to the memory module, hold it by the card edge,
do not touch components, and follow “Workstation guidelines” on page 4-4.
2. Grasp the edge of the memory module 2, and then remove it from the memory module slot.
✎
Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory module
slot.
Reverse this procedure to install a primary memory module.