Filter
Top Products
setting up and using your workstation
removing and replacing the cover and front bezel
Chapter 1 27
replacing the cover and front bezel
1. Ensure that all internal cables are properly connected and safely
routed.
2. Ensure that the bezel is correctly oriented, align the two plastic bezel
hinges with their bezel slots on the right-hand side of the chassis,
and swing the bezel closed. Confirm that the bezel latches as shown
in Figure 1-8 are seated flat against the chassis.
Figure 1-9 Inserting the Bezel Hinges into their Slots on the Workstation
Bezel HingesBezel Hinge
Slots