Filter
Top Products
setting up and using your workstation
removing and replacing workstation components
Chapter 128
3. Insert the flanges located on the bottom edge of the cover into their
slots on the bottom left edge of the workstation. See Figure 1-10.
Next rotate the cover into place as shown by the arrow. You will hear
the cover snap into place when the cover is securely closed.
Figure 1-10 Replacing the Cover
4. Lock the cover using the key provided, if required. Reconnect all the
power and telecommunication cables.
removing and replacing workstation components
Instructions for removing and replacing workstation components, such
as the power supply, can be found in the x1100 Technical Reference
located at this web site:
www.hp.com/go/workstationsupport
This web site contains a wide range of free information, including
downloadable documentation, service and support options, and the latest
versions of drivers and utilities.
Cover Flanges
Cover Slots