Filter
Top Products
6 - 47
Plessey Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description (page 6-1) for additional
information. Minimum and Maximum lengths = 1-80. Minimum Default = 3, Maximum Default = 80.
GS1 DataBar Omnidirectional
< Default All GS1 DataBar Omnidirectional Settings >
GS1 DataBar Omnidirectional On/Off
GS1 DataBar Omnidirectional Redundancy
If you are encountering errors when reading GS1 DataBar Omnidirectional bar codes, you may want to adjust the redun-
dancy count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the
number of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the
redundancy, scan the GS1 DataBar Omnidirectional Redundancy bar code below, then scan a redundancy count
between 0 and 10 on the Programming Chart inside the back cover of this manual. Then scan the Save bar code. Default
= 0.
Minimum Message Length
Maximum Message Length
* On
Off
GS1 DataBar Omnidirectional
Redundancy