Filter
Top Products
3 - 3
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the scanner emits on a good read. Default = Medium.
Beeper - Transmit Order
The beeper transmit order determines when the good read beep occurs. The scanner can be set to emit the good read
beep either before or after data transmission. Default = Before Transmission.
Vibrate – Good Read
The scanner vibrates once when a bar code is successfully read, and twice when a programming bar code is successfully
read. When a programming bar code is unsuccessful, the scanner emits one long vibration (2 times the Vibrate Duration
length). The trigger cannot be used again until the vibration has ended. Scan Vibrate - Good Read Off to keep the scan-
ner from vibrating. This setting may be preferable if you need to scan multiple bar codes in succession and do not want to
wait till the vibration has ended. Default = Vibrate - Good Read On.
Off
Low (1600 Hz)
* Medium (3200 Hz)
High (4200 Hz)
* Before Transmission
After Transmission
Vibrate- Good Read Off
* Vibrate- Good Read On