Filter
Top Products
6 - 51
China Post (Hong Kong 2 of 5)
<Default All China Post (Hong Kong 2 of 5) Settings>
China Post (Hong Kong 2 of 5) On/Off
China Post (Hong Kong 2 of 5) Redundancy
If you are encountering errors when reading China Post (Hong Kong 2 of 5) bar codes, you may want to adjust the redun-
dancy count. Redundancy adjusts the number of times a bar code is decoded before transmission, which may reduce the
number of errors. Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the
redundancy, scan the China Post (Hong Kong 2 of 5) Redundancy bar code below, then scan a redundancy count
between 0 and 10 on the Programming Chart inside the back cover of this manual. Then scan the Save bar code. Default
= 0.
GS1 Code Expansion Off
EAN8 to EAN13 Conversion
* GS1 Emulation Off
On
* Off
China Post (Hong Kong 2 of 5)
Redundancy