Filter
Top Products
6-8 C
HAPTER
6: I
NSTALLING
AND
S
ETTING
U
P
THE
M
ODULE
4
Remove any objects obstructing the cable and
straighten out any kinks in the cable.
5
If you suspect that the fiber optic connector is dirty,
refer to “Cleaning Dirty Fiber Optic Connectors” on
page D-24.
6
Check that your cable meets the specifications
described in “ATM Cable Specification” on page C-1.
7
Replace the cable, and check the Link Status LED
again.
8
Contact IBM Technical Support; refer to Appendix E.