Filter
Top Products
8-10 C
HAPTER
8: M
ANAGING
THE
ATM M
ODULE
Finding an Address Entry
1
In the
Far MAC Address
field, type in the MAC
address associated with the ATM address you are
trying to locate.
2
Select the FIND ATM ADDRESS button. An asterisk (*)
is shown next to the entry in the database listbox.
Updating Address Entries
To view up-to-date ARP Table entries, select the
REFRESH button.
Deleting an Address Entry
1
Within the listbox, use the spacebar to select the
entry you wish to delete.
2
Select the DELETE button.
Displaying an ATM Connection
This section describes how to create and view ATM
connections in the ATM Connection Table.
To access the ATM Connection Table screen, access
the ATM Port Setup screen, as described in “ATM Port
Setup” on page 8-6, and then select the
CONNECTION TABLE button. An example of the ATM
Connection Table screen is shown in Figure 8-9.
Figure 8-9
ATM Connection Table Screen
The following fields apply to the listbox:
Port
Identifies the selected port.
VPI:VCI
Identifies the ATM connection by showing
the Virtual Path Identifier and Virtual Circuit Identifier.
End
Identifies whether the near or far end LEC ATM
address is displayed. The options are:
Near
— the details are for the LEC in the ATM Module.
Far
— the details are for the LEC at the far end of the
connection, for example a LEC in an ATM Switch or
attached ATM device.