Filter
Top Products
2 A
BOUT
T
HIS
G
UIDE
Finding Information in This Guide
The following table shows you where to find specific
information within this guide.
Conventions
Table 1 and Table 2 list conventions that are used
throughout this guide.
Task Location
Learning
concepts
Chapter 1, ‘Features and Benefits”
Chapter 2, ‘Network Layer Concepts”
Chapter 3, ‘Virtual LAN Concepts”
Planning your
network
Chapter 1, ‘Features and Benefits”
Chapter 4, ‘Putting Your ATM Network Together”
Chapter 5, ‘Network Configuration Examples”
Appendix C, ‘ATM Module Technical Specifications”
Upgrading
Software
Chapter 8, ‘Managing the ATM Module”
Installing the
ATM Module
Chapter 6, ‘Installing and Setting Up the Module”
Appendix A, ‘Safety Information”
Accessing screens Chapter 7, ‘Accessing Management Features”
Appendix B, ‘Screen Access Rights”
Managing
the ATM Module
Chapter 8, ‘Managing the ATM Module”
Monitoring
the ATM Module
Chapter 9, ‘Monitoring the ATM Module”
Troubleshooting Appendix D, ‘Troubleshooting”
Getting Technical
Support
Appendix E, ‘Technical Support and Service”
Identifying terms ‘Glossary”
Further reading ‘Bibliography”
Table 1
Notice Icons
Icon Notice Type Alerts you to...
Information
note
Important features or instructions
ATTENTION Risk of system damage or data loss
CAUTION Conditions or procedures that can cause
personal injury that is neither lethal nor
extremely hazardous
DANGER Conditions or procedures that can result in
death or severe personal injury
Table 2
Text Conventions
Convention Description
Screen
display
This typeface represents information as it appears on
the screen.
The words
“Enter” and
“Type”
The word “enter” means type something and then
press the Return or Enter key. Do not press the Return
or Enter key when an instruction simply says “type.”
[Key] names Key names appear in text in one of two ways:
■
Referred to by their labels, such as “the Return
key” or “the Escape key”.
■
Enclosed within brackets, such as [Return] or [Esc].
If you must press two or more keys simultaneously,
the key names are linked with a plus sign (+). For
example: Press [Ctrl]+[Alt]+[Del].