Filter
Top Products
95
Ready
What this message means:
The printer is ready to receive and process print jobs.
What you can do:
Send a job to print.
Ready Hex
What this message means:
The printer is in Hex Trace mode and is ready to receive and process print jobs.
What you can do:
•
Send a job to print. All data sent to the printer is printed in hexadecimal and character
representation. Control strings are printed, not executed.
• Turn the printer off and then on to exit Hex Trace mode and return to Ready status.
Reattach
<device>
What this message means:
The specified device is either not fully connected to the printer or is experiencing a hardware
failure.
What you can do:
•
Reestablish communication by removing the specified device and reattaching it to the printer.
• Press Go to clear the message and continue printing without using the device.
• In the case of a hardware failure, turn the printer off and back on. If the error recurs, turn the
printer off, remove the specified device, and call for service.
See also:
Calling for service