Filter
Top Products
105
The optional Termination Character is transmitted at the end of the data.
None - None
Tab - Horizontal Tab
CR - Carriage Return (default)
CRLF - Carriage Return & Line Feed
Custom – User Defined Termination Character
If the User Defined Termination Character is selected, then use the left 3and 4right
arrow keys to select the custom character.
Laser / CCD Setting
The “Laser Setting” function allows you to set the laser scan characteristics.
Standard Laser or CCD LR or ALR installed
These options are used to configure the laser or CCD device behavior, and the trigger
mode for the M71V2 handheld terminal.
Trigger Mode
Trigger Trigger activates scanning device for as long as trigger is held up
to the Laser Timeout value in seconds. (Recommended)
Pulse Continues to keep the scanner active even when the trigger is not
held down, up to Laser Timeout value in seconds.
Aiming Time This function turns on the laser point or laser aim mode.
Note: The laser aim mode is only available on the Long Range
(LR) and Advanced Long Range (ALR) laser.