Filter
Top Products
69
ON Enable Concatenate Mode. The concatenate mode allows the M71V2
handheld terminal to accumulate multiple bar codes in its buffer and then
sends them to the computer just like they were a single bar code. When a
Code 39 label containing a leading space is read, the M71V2 emits two
short beeps and buffers the data without transmission. This process
continues until a Code 39 label without a leading space is read or 128
characters are buffered. A Code 39 bar code label that only contains a
single or multiple dashes (minus sign) will clear the buffer.
OFF* Disable Concatenate Mode.
Setting the UPC Bar Code
UPC DECODER
ON* Enable reading UPC-A and UPC-E bar codes.
OFF Disable reading UPC-A and UPC-E bar codes.
CONVERT UPC-E TO UPC-A
ON Convert all UPC-E labels to their UPC-A equivalents before transmission.
After conversion, the reader will follow the UPC-A programming options.
OFF* No conversions will be performed.
CONVERT UPC-A TO EAN-13
ON Convert all UPC-A labels to an equivalent EAN-13 format by inserting a
leading zero. After conversion, the reader will follow the EAN-13
programming options.
OFF* No conversions will be performed.
SEND UPC-A NUMBER SYSTEM