IBM M71V2 Network Card User Manual


 
75
ON The reader will insert a blank after the 1st, 5th, and 10th characters of a
14-character Codabar label. The label length does not include the start
and stop characters.
OFF * Disable CLSI formatting.
CLSI CHECK DIGIT
ON Enable the CLSI check digit. When this option is enabled, all fourteen
digit numeric bar codes must contain a valid check digit.
OFF* Disable the CLSI check digit. Check digit verification will not be
performed.
Setting the Code 128 Bar Code
CODE 128 DECODER
ON * Enable reading Code 128 bar codes.
OFF Disable reading Code 128 bar codes.
UCC-128 VERIFICATION
ON A valid Mod 10 Check Digit is required on UCC-MOD 10 bar codes.
(Applies to 20-digit serial shipping container bar codes.)
OFF * UCC-MOD 10 bar codes are accepted without valid Mod 10 Check Digits.
SEND MOD 10 CHECK DIGIT
ON * Transmit the Mod 10 Check Digit with the bar code entry.
OFF Do not transmit the Mod 10 Check Digit.