Filter
Top Products
35
The Auth setting determines what type of network system you are using.
These two modes simply define how the above key sets will be used to encrypt the data
sent over the radio. Whichever mode is selected, the access point MUST be set to the
same mode for communications to take place.
The Power Save setting will force the radio card to turn off when not in use to save
power. If you experience connection problems, turn the Power Save feature off. Battery
life will be shortened with the Power Save feature shut off.
The Channel setting determines which channel the radio card will start to communicate
on. This should be set to the same channel as the access points.