Filter
Top Products
83
The Symbology settings for the 2D Imager are
quite extensive and complex. Usually the default
settings are satisfactory for most applications.
Please refer to the “HHP® IMAGETEAM™ OEM
Engine User’s Guide” for a more technical
description of the following symbology settings.
Setting the Code 39 Bar Code
The individual bar codes can be enabled and disabled by hitting the [Space] key. Only
enabled bar code symbologies can be modified. To modify a bar code symbology hit
the [ENTER] key while the bar code name is highlighted.
Code 39
Checked* Enable reading Code 39 bar codes.
Unchecked Disable reading Code 39 bar codes.
Start/Stop
Checked Send any leading or trailing start characters with the bar code.