Filter
Top Products
24
The M71V2 RF Server Login
This chapter describes the login functions of the M71V2
terminal. It also describes using Telnet and Terminal
Emulation support.
arning: If the M71V2 Handheld Terminal has improper security and/or
network settings, the terminal will fail to connect to any network devices.
For help see the Network Settings section of this manual.
The CommandLink™ Software
The CommandLink™ software allows a Windows based PC
to become an RF server. An RF server is a master control PC
that tells the M71V2 handheld terminal what to display and
what to do with collected data. If your network already has
an RF server then you may choose to login into that server.
Many servers use a Telnet session to connect them to their
client devices. By default, the M71V2 starts a telnet session
when it is first turned on. For more information about telnet,
see the Telnet section of this chapter.
Wait WLAN
The following screen shows the M71V2 handheld terminal waiting to find a Wireless
Local Area Network (WLAN).
Chapter
3
W