Filter
Top Products
78
Setting the Code 11 Bar Code
CODE 11 DECODER
ON Enable reading Code 11 bar codes.
OFF * Disable reading Code 11 bar codes.
TWO CHECK DIGITS REQUIRED
ON Two valid check digits are required for each label.
OFF * One valid check digit is required for each label.
SEND FIRST CHECK DIGIT
ON Transmit the First Check Digit.
OFF * Do not transmit the First Check Digit.
SEND SECOND CHECK DIGIT
ON Transmit the Second Check Digit.
OFF * Do not transmit the Second Check Digit.
Setting the RSS Bar Code
The RSS scanning capabilities are only available on M71V2 units that have a
DECODER Version (see Firmware Version) version 2.30 or higher (the AtMEL co-
processor firmware).
While the RAM DISK IMAGE and LINUX KERNEL can be programmed in the field,
the AtMEL DECODER can ONLY be re-programmed at the factory.