Filter
Top Products
34
To modify an encryption key set simply highlight the appropriate key set. Note that the
number of key pairs will change depending on which encryption format you are using.
Note: Some manufacturers will call their 40 bit encryption 64 bit encryption or call their
128 bit encryption 160 bit encryption; in any case they are the same settings. Also some
manufacturers will number their keys 1 to 4; these keys match the 0 to 3 keys on the
M71V2.
The key that is set MUST match, in exactly the
same sequence, of the key that is currently set
in the Access Points. The key on the access
point that is set must match the “Key ID” field !
The Mode setting determines what type of network is in use.
The Infrastructure Mode is for connecting the M71V2 Handheld Terminal to a network
of access points. The Ad Hoc Mode is used for connecting the M71V2 to a single access
point or a single radio card in a peer-to-peer network, such as a single laptop computer
for example.