Filter
Top Products
MaxLoader User’s Guide
41
When this format is selected, the device base address must be specified. This
address represents the lowest address in the device. The file created contains an
entry for each location in this device. ASCII HEX format can be created for
programmable memory devices only.
JEDEC Standard <PLD devices only>
JEDEC (Joint Electronic Device Engineering Council) files are the standard
method for describing PLD fuse patterns and test vectors. JEDEC files contain
fuse data, test vectors, part numbers, and checksums. The checksum of the file
allows you to verify that a given file is intact and has not been unintentionally
modified. JEDEC files normally use the extension (last 3 letters) “.JED.”
For more information on the JEDEC standard, contact:
Global Engineering Documents Inc. at (800) 854-7179
Electronic Industries Association at (202) 457-4900.
Following is an example of a JEDEC file:
<STX>File for PLD 15S8 Created on 11-SEP-96 5:08PM
2754 memory decode 345-432-123
Seung Park PK Logic corp.
QP20* QF448* QV8*
F0*X0*
L0000111110111111111111111111111*
L0028101111111111111111111111111*
L0056111011111111111111111111111*
L0112010110110111101111111111111*
L0224011110111011101111111111111*
L0336010101110111011111111111111*
V0001000000XXXNXXXHHHLXXN*
V0002010000XXXNXXXHHHLXXN*
V0003100000XXXNXXXHHHLXXN*
V0004110000XXXNXXXHHHLXXN*
V0005111000XXXNXXXHLHHXXN*
V0006111010XXXNXXXHLHHXXN*