Filter
Top Products
MaxLoader User’s Guide
43
POF file <Altera EPMxxx devices only>
The programming object file (.pof) for an EPM7128A or EPM7256A device
can be programmed into the EPM7128AE or EPM7256AE device, respectively,
using the MAX+PLUS
®
II software version 9.6 and later or with 3rd party
programming software from EE Tools programmers.
For further question on POF file, contact http://www.altera.com/support/spt-
index.html.
File / Load
Data can be loaded into the memory from a device or by opening a data file.
Load fills your buffer memory with the data from storage for viewing or editing.
This command loads the data from the selected file storage into the memory
buffer. In order to the use “All HEX File” selection, the HEX file must be one
of the file formats supported by the MaxLoader(TopMax/Chip Max), such as
Intel HEX(MCS-80/86/386, MOTOROLA S(1-9), Tektronix HEX and ASCII
HEX.