Filter
Top Products
MaxLoader User’s Guide
67
Device / Auto Menu Option
Users can choose a operation stream for “Auto” button.
CAUTION: Clicking the Auto button makes the selected device secured. It is
highly recommended that customer should click on the “auto” button after
reviewing the “Auto Option” stream.
Device / Blank Check
The Blank Check function is used to verify whether or not a device is in an
erased or unprogrammed state.
All EPROM (Erasable Programmable Read Only Memory) devices should be
checked before programming. EEPROM (Electrical Erasable Programmable
Read Only Memory) based parts do not need this command because
EEPROM’s are erased automatically before programming.
PLD based parts are checked by verifying all of the fuses that are intact. Any
erased PLD’s should pass this test.