Filter
Top Products
MaxLoader User’s Guide
66
Device / Change Algorithm
Users are provided with an option of changing the programming parameters of
most devices. Once you select the “Change Algorithm” option under the
DEVICE menu, the user will be presented with a list of device specific
programming parameters, such as Vccp, Vpp, Read Vcc, Verify Vcc Low,
Verify Vcc High, Pulse Width, Over Pulse Width, Over Pulse Mul, and Retry
number. Each of these parameters can be selected and edited individually by
changing the existing numbers in the parameter box and pressing the close
button. The user will then be prompted to enter the new value for that
parameter.
CAUTION: Please note that before deciding to modify any programming
parameter, the user must consult the manufacturer programming specification
for that device. EE Tools will not be responsible for any damages caused by
any unauthorized modified programming parameters. Any changes in
programming parameters are temporary and the original parameter’s value
will be restored once the operation on that device is complete. However, the
user can store the modified programming parameter for a particular device by
using Macro command.