Filter
Top Products
EQQJ517E EQQJ522E
EQQJ517E INVALID VALUE
VAL
SUPPLIED BY USER EXIT
USRX
FOR VARIABLE
VAR
IN TABLE
TAB
FOR
APPLICATION
ADID
, OCCURRENCE IA IS
IAD
,
IAT
, OPERATION NUMBER IS
OPNO
Explanation: The value that the user supplied for the variable violates the verification rules in the variable definition.
System action: If the error occurs during submit, the current operation status is set to ended-in-error with error code
OJCV. Otherwise, the status is not changed.
User response: Correct the user module or verification criteria. To use the corrected user module, you must restart
TME 10 OPC.
EQQJ518E THE SUBSTITUTION EXIT
USRX
WAS REFERENCED BY VARIABLE
VAR
. THE EXIT WILL NOT BE
CALLED AS IT HAS BEEN MARKED NOT EXECUTABLE BY OPC/ESA. APPLICATION IS
ADID
,
INPUT ARRIVAL IS:
IAD
,
IAT
, AND OPERATION NUMBER IS
OPNO
Explanation: TME 10 OPC has previously discovered an abend in this exit and marked it as not executable. This
exit will not be called again.
System action: The current operation status is set to ended-in-error, with error code OJCV.
System programmer response: Correct the exit, and restart TME 10 OPC to use the exit again.
EQQJ519E OPC/ESA DID NOT GET STORAGE ENOUGH TO BUILD JCL RECORD APPLICATION IS:
ADID
,
OPERATION NO IS:
OPNO
, INPUT ARRIVAL DATE IS:
IAD
AND INPUT ARRIVAL TIME IS:
IAT
Explanation: TME 10 OPC tried to allocate storage for a final build of the JCL record, but the request for storage
failed.
System action: The operation status depends on the SUBFAILACTION keyword in the JTOPTS initialization
statement. The operation can:
Keep status R or extended status RE
Get status C (complete)
Get status E (ended-in-error) with error code OSUF.
System programmer response: Make sure TME 10 OPC is running in a big enough region, and restart TME 10
OPC.
EQQJ520E VALUE LENGTH IS REQUIRED WHEN COMPARISON OPERATOR SPECIFIED
Explanation: Because you entered a comparison operator, you must enter a value length.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ521E COMPARISON OPERATOR REQUIRED WHEN LENGTH OPERATOR SPECIFIED
Explanation: Because you entered a value length, you must enter a comparison operator.
System action: The system waits for you to respond.
User response: Enter the correct value.
EQQJ522E THE DEFAULT VALUE IS INVALID FOR THE VERIFICATION TYPE
Explanation: The default value that you entered does not match the verification rules for the variable.
System action: The system waits for you to respond.
User response: Enter the correct value.
Chapter 13. EQQJnnn Messages 137