Filter
Top Products
EQQM338I EQQM343E
EQQM338I OPC/ESA HAS FOUND NO INCONSISTENCIES IN THE JCL FOR A RESTART
Explanation: TME 10 OPC has investigated the JCL for restart and has found no errors. The operation may be
restarted.
System action: None.
User response: Leave the panel with END command to save the JCL and initiate catalog management actions for
the operation, cancel the restart using the CANCEL command.
EQQM339W THE OPERATION CANNOT BE RESTARTED WITHOUT CHANGING THE JCL
Explanation: TME 10 OPC has investigated the JCL for restart and has detected inconsistencies. TME 10 OPC
detects many situations that can cause problems during the step restart, such as; missing instream data, or references
to a temporary dataset created prior to the restart step.
System action: The JCL is displayed. ISPF message lines are inserted by TME 10 OPC to document the
inconsistencies detected.
User response: Either change the JCL, cancel the restart for this operation, or save the JCL after determining that
the inconsistencies reported will not result in a problem during restart.
EQQM340E OCCURRENCE IN A GROUP MUST BE REMOVED BEFORE IT CAN BE DELETED
Explanation: An occurrence that belongs to an occurrence group cannot be deleted.
System action: The system waits for you to respond.
User response: You must remove the occurrence before you can delete it. You can do this by typing the row
command RG on the
MODIFYING OCCURRENCES IN THE CURRENT PLAN panel, or the HANDLING OPERATIONS ENDED
IN ERROR
panel. Alternatively, you can erase the group ID field on the MODIFYING AN OCCURRENCE IN THE CURRENT
PLAN
panel.
EQQM341E OCCURRENCE IN A GROUP MUST BE REMOVED BEFORE IT CAN BE COMPLETED
Explanation: An occurrence that belongs to an occurrence group cannot be completed.
System action: The system waits for you to respond.
User response: You must remove the occurrence before you can complete it. You can do this by typing the row
command RG on the
MODIFYING OCCURRENCES IN THE CURRENT PLAN panel, or the HANDLING OPERATIONS ENDED
IN ERROR
panel. Alternatively, you can erase the group ID field on the MODIFYING AN OCCURRENCE IN THE CURRENT
PLAN
panel.
| This message can be issued also when you try to complete the last uncompleted operation of an occurrence
| belonging to a group. It is issued because the completion of an operation would imply the completion of the
| occurrence; however, TME 10 OPC does not allow manual completion of this kind of occurrence before the
| occurrence has been removed from the group.
EQQM342E OCCURRENCE IS NOT A MEMBER OF AN OCCURRENCE GROUP
Explanation: The occurrence does not belong to an occurrence group.
System action: The request is rejected.
User response: None.
EQQM343E THE APPLICATION IS NOT A MEMBER OF AN APPLICATION GROUP
Explanation: The application does not belong to an application group.
System action: The request is rejected.
User response: None.
192 TME 10 OPC Messages and Codes