Filter
Top Products
Electrical Specifications
62 Datasheet
7.4 Absolute Maximum and Minimum Ratings
Table 7-8 specifies absolute maximum and minimum ratings. At conditions outside
functional operation condition limits, but within absolute maximum and minimum
ratings, neither functionality nor long-term reliability can be expected. If a device is
returned to conditions within functional operation limits after having been subjected to
conditions outside these limits, but within the absolute maximum and minimum
ratings, the device may be functional; however, with its lifetime degraded depending on
exposure to conditions exceeding the functional operation condition limits.
Although the processor contains protective circuitry to resist damage from Electro-
Static Discharge (ESD), precautions should always be taken to avoid high static
voltages or electric fields.
Notes:
1. For functional operation, all processor electrical, signal quality, mechanical, and thermal specifications must
be satisfied.
2. Excessive overshoot or undershoot on any signal will likely result in permanent damage to the processor.
7.4.1 Storage Conditions Specifications
Environmental storage condition limits define the temperature and relative humidity
limits to which the device is exposed to while being stored in a Moisture Barrier Bag.
The specified storage conditions are for component level prior to board attach (see
notes in Table 7-9 for post board attach limits).
Table 7-9 specifies absolute maximum and minimum storage temperature limits that
represent the maximum or minimum device condition beyond which damage, latent or
otherwise, may occur. The table also specifies sustained storage temperature, relative
humidity, and time-duration limits. These limits specify the maximum or minimum
device storage conditions for a sustained period of time. At conditions outside sustained
limits, but within absolute maximum and minimum ratings, quality and reliability may
be affected.
Table 7-8. Processor Absolute Minimum and Maximum Ratings
Symbol Parameter Min Max Unit Notes
1,2
V
CC
Processor core voltage with respect to
V
SS
-0.3 1.4 V
V
CCPLL
Processor PLL voltage with respect to
V
SS
-0.3 2.0 V
V
CCD
Processor I/O supply voltage for DDR3
(standard voltage) with respect to V
SS
-0.3 1.85 V
V
CCD
Processor I/O supply voltage for DDR3L
(low Voltage) with respect to V
SS
-0.3 1.7 V
V
SA
Processor SA voltage with respect to V
SS
-0.3 1.4 V
V
TTA
V
TTD
Processor analog I/O voltage with
respect to V
SS
-0.3 1.4 V
Table 7-9. Storage Condition Ratings (Sheet 1 of 2)
Symbol Parameter Min Max Unit
T
absolute storage
The minimum/maximum device storage temperature
beyond which damage (latent or otherwise) may
occur when subjected to for any length of time.
-25 125 °C
T
sustained storage
The minimum/maximum device storage temperature
for a sustained period of time.
-5 40 °C