Filter
Top Products
Datasheet, Volume 1 25
Interfaces
Note:
1. System memory timing support is based on availability and is subject to change.
2.1.3 System Memory Organization Modes
The IMC supports two memory organization modes, single-channel and dual-channel.
Depending upon how the DIMM Modules are populated in each memory channel, a
number of different configurations can exist.
2.1.3.1 Single-Channel Mode
In this mode, all memory cycles are directed to a single-channel. Single-channel mode
is used when either Channel A or Channel B DIMM connectors are populated in any
order, but not both.
2.1.3.2 Dual-Channel Mode – Intel
®
Flex Memory Technology Mode
The IMC supports Intel Flex Memory Technology Mode. Memory is divided into a
symmetric and a asymmetric zone. The symmetric zone starts at the lowest address in
each channel and is contiguous until the asymmetric zone begins or until the top
address of the channel with the smaller capacity is reached. In this mode, the system
runs with one zone of dual-channel mode and one zone of single-channel mode,
simultaneously, across the whole memory array.
Note: Channels A and B can be mapped for physical channel 0 and 1 respectively or vice
versa; however, channel A size must be greater or equal to channel B size.
Table 2-4. System Memory Timing Support
Segment
Transfer
Rate
(MT/s)
tCL
(tCK)
tRCD
(tCK)
tRP
(tCK)
CWL
(tCK)
DPC
CMD
Mode
Notes
1
Desktop
1333 9 9 9 7
11N/2N
22N
1600 11 11 11 8
11N/2N
22N
AIO
1333 9 9 9 7
11N/2N
22N
1600 11 11 11 8 1 1N/2N