Filter
Top Products
13
Using the
Console Manager
Accessing with the serial port
1 Use the enclosed null modem cable to connect the serial port of
your PC to the serial port of the Management Module.
2 Open a terminal emulation program (such as HyperTerminal in
Microsoft Windows* 95). Use these communication parameters:
• 9600 baud
• 8 data bits
• No parity
• 1 stop bit
• No flow control
3 Log into the Console Manager:
Enter username: [ ]
Enter password: [ ]
By default, no password or username is assigned. See page 45 to
assign them.
NOTE
Make sure VT100 arrows are
enabled in your terminal emula-
tion program.
3
NOTE
If you’re running Windows 95
or NT*, make sure the scroll
lock is
off
on your keyboard.