Filter
Top Products
25
Supported traps include:
• notification of utilization exceeding a defined percentage or
collisions exceeding a defined number (configurable in LANDesk
Network Manager). Also configurable by using a MIB browser to
edit these objects in iee110.mib:
- rptrDomainUtilizationTrapThreshold
- rptrDomainUtilizationTrapPeriod
- rptrDomainCollisionTrapThreshold
- rptrDomainCollisionTrapPeriod
• notification of a hub configuration change, such as a speed change
or an unplugged Cascade Cable.
• notification of a hub power cycled or reset.
IP address fields:
Sets the IP addresses of PCs with SNMP
applications installed.
enabled/disabled:
Select enabled to have the Management
Module send traps to that IP address. Select disabled to prevent
the Management Module from sending traps to that IP address. Use
AS
or
z
to toggle between the two choices.
Trap community string fields:
Sets the community string
that must match the trap community string in the SNMP application.