Filter
Top Products
1
1. Turn off the power. Unscrew and remove the panel from an expansion slot
on the Express 10/100 Stackable Hub.
2. Plug the Management Module into a slot, using the retaining screws to secure
the module to the hub.
3. Set the IP configuration (none is assigned by default). You’re now ready to
manage hubs.
Quick Start
Use the LCD to quickly set the IP configuration.
Expansion slots: Use either slot. They are
identical.
123
4
Change hub speed
10BASE-T
100BASE-TX
Power
Intel Express
10/100 Stackable Hub
Collision
Managed
Status
8
7
6
5
91011
12
Green (left)
Link = solid
Activity = blink
Amber (right)
Wrong speed = blink
Disabled = solid
Hub speed: Install in a hub running at 100
Mbps or at 10 Mbps. It will manage all hubs in
the stack, regardless of speed, if they’re
connected with Intel Cascade Cables.
Turn on the power after installing.
Esc
Management Module
Reset ➜
123
4
Change hub speed
10BASE-T
100BASE-TX
Power
Intel Express
10/100 Stackable Hub
Collision
Managed
Status
8
7
6
5
91011
12
Green (left)
Link = solid
Activity = blink
Am
ber (right)
W
rong speed = blink
Disabled = solid
Management Module