Intel GME965 Computer Hardware User Manual


 
Getting Started
316704-001 / Development Kit User’s Manual 17
Development Board
Implementation
Comments
Power
Management
ACPI Compliant S0 – Power On
S3 – Suspend to RAM
S4 – Suspend to Disk
S5 – Soft Off
M0 – All Wells powered
M1 – Main Well down. Only ME power on
M-off – ME powered off
Form Factor ATX 2.2 like form factor 10 layer board – 12” x 10.2”
Note: Review the document provided with the Development Kit titled “Important Safety and
Regulatory Information”. This document contains safety warnings and cautions that
must be observed when using this development kit.
2.2 Included Hardware and Documentation
The following hardware and documentation is included in the development kit:
One development board
One Intel
®
Core
TM
2 Duo processor with 4 MB L2 Cache on 65nm process in
the 478 pin Flip-Chip Pin Grid Array (Micro-FCPGA) package (Installed)
One Firmware Hub (FWH) (Installed)
One GMCH (GME965) heatsink (Installed)
One Type 2032, socketed 3 V lithium coin cell battery (Installed)
One 256 MByte DDR2 SODIMM (200 Pin)
One CPU thermal solution and CPU back plate (included in kit box – not
populated on board)
One cable kit
One Development Kit User’s Manual
One Port 80 add-in card
2.3 Software Key Features
The driver CD included in the kit contains all of the software drivers necessary for
basic system functionality under the following operating systems: Windows* XP/XP
Embedded, Vista and Linux*.