Filter
Top Products
SECTION 2Using the Pen Computer for the First Time
2-8 PEN*KEY
R
6642 Pen Computer User’s Guide
B
CAUTION: Do not place the floppy disk drive unit on its side or upside
down.
B
CAUTION: Do not press on the floppy disk drive unit; it may damage the
drive or cause malfunction.
B
CAUTION: Do not place the AC adapter on top of the floppy disk drive
unit; it may cause the drive to malfunction.
1. Turn off the computer.
2. Open the cover of the external floppy disk drive/port
expander cover on the right side of the 6642.
3. Connect the connector of the floppy disk drive unit to
the 6642.
Figure 2Ć5
Floppy Drive/Port Expander Connector Removal
Removing External Floppy Disk
Drive/Port Expander
1. Remove the floppy disk from the floppy disk drive.
2. Turn off the computer.
3. Disconnect the floppy disk drive unit by simultaneousĆ
ly pressing the buttons on each side of the connector
and pulling them out. See figure 2-5.
4. Close the cover of the floppy disk drive/port expander.