Filter
Top Products
SECTION 5Connecting Peripheral Equipment
5-6 PEN*KEY
R
6642 Pen Computer User’s Guide
Printer
You can connect a printer to a parallel port of the external
floppy drive/port expander.
"
NOTE: Read the printer manual before setting up the printer.
Check the setup utility for the LPT port settings before
installing a printer driver.
Installing a Printer Driver
To use a printer, you need to install a printer driver.
1. In Windows Start menu, select Settings-Printers.
2. Double-tap Add Printer. The Add Printer appears.
3. Tap Next.
4. Confirm Local printer is selected and tap Next.
5. Select the manufacturer and the printer, and click
Next. If you cannot find the model name of your printĆ
er you will have to install the printer driver included
with your printer. See your printer manual for deĆ
tails.
6. Select LPT1 and tap Next.
7. Make sure the printer name is correct and tap Next.
8. Decide whether to print a test page, and tap Finish.
Before printing a test page, make sure the printer is
powered up and on line.
RS–232C
An RS-232C serial device, such as a modem or scanner can be
connected to the 6642. The serial port is available on the exterĆ
nal floppy drive/port expander. Check the setup utility for serial
port settings on the 6642 and consult the user manual before
connecting the device.