Juniper Networks IDP250 Network Card User Manual


 
IDP Sensors 7
Chapter 2
Hardware Overview
This chapter provides detailed descriptions of the Juniper Networks IDP sensors
and their components.
This chapter has the following sections:
IDP Sensors on page 7
Traffic Ports (Forwarding Interfaces) on page 10
Management Ports on page 13
Hard Drives and USB Ports on page 13
Power Supplies on page 13
IDP Sensor LEDs on page 14
IDP Sensors
This section provides an overview of the following IDP sensors:
IDP 75 Sensor on page 8
IDP 250 Sensor on page 8
IDP 800 Sensor on page 8
IDP 8200 Sensor on page 9
Each sensor contains a USB port you can use for reimaging the sensors.
CAUTION: Both the console serial port and the management network interface
port use the same RJ-45 connector. Do not plug a network cable into the console
serial port.