Juniper Networks IDP250 Network Card User Manual


 
IDP 75, 250, 800, and 8200 Installation Guide
10 Traffic Ports (Forwarding Interfaces)
Figure 6: IDP 8200 Front Panel
Traffic Ports (Forwarding Interfaces)
The IDP 75, 250, 800, and 8200 sensors have traffic ports (forwarding interfaces),
which are located on the front of each device. Sensors can have a combination of
copper and fiber ports.
Figure 7: Traffic Ports
Configurable NIC States
Copper port pairs on the IDP 75, 250, 800, and 8200 can be configured to take
specified actions when the sensor becomes unavailable. Using the Appliance
Configuration Manager (ACM), you can configure how the sensor responds when it
is shut down gracefully and how it responds when there is a failure.