Juniper Networks IDP250 Network Card User Manual


 
Adding Your Sensor to NSM 31
Chapter 5: Adding the Sensor to NSM
Figure 14: Add Device Wizard - Connection Settings
6. Enter the following connection information:
a. Enter the IP address of the sensor.
b. Enter admin in the Admin User Name box.
c. Enter the password for the admin user name. The default password is
abc123.
d. Enter the password for the device root user. The default password is
abc123.
e. Select SSH Version 2 as the connection method. Leave the port number as
22.
f. Click Next to open the Verify Device Authenticity dialog box (Figure 15).
After a moment, the wizard displays the SSH key fingerprint information.
Figure 15: Add Device Wizard - Verification Settings
NOTE: All passwords handled by NetScreen-Security Manager are case-sensitive.