Filter
Top Products
15
ENGLISH
Controls and Features (Cont.)
Remote Control Unit (Cont.)
t
RM-MQX1G REMOTE CONTROL UNIT
KEY
STON
RM-MQX1G REMOTE CONTROL UNIT
O
EX
E
N
LOCK
UNLOCK
LOCK UNLOCK
p
r
w
6
5
4
3
2
1
7
8
q
e
MODE
EXIT
ZOOM
KEYSTONE
SHUTTER
DIGITAL
ZOOM
SHIFT FOCUS
VIC1 VIC2 VIC3
MENU
ENTER
OPERATE
BACK
LIGHT
T
W
T
W
ON
OFF
9
y
9
SHUTTER ON/OFF buttons
Use these buttons to control the internal shutter.
ON : Closes the shutter to turn off the projection.
OFF : Opens the shutter to turn on the projection.
For details on the operation, refer to page 36.
p
Wired remote control terminal
To use the remote control unit as a wired unit, connect the
supplied remote control cable between this terminal and
the REMOTE terminal on the connector panel of the pro-
jector.
For details, refer to page 24.
• The signal transmitter of the remote control unit will stop
working when the cable is connected to this terminal.
q
KEYSTONE buttons
Use these buttons to correct a trapezoidal distortion of the
projected image.
For details on the operation, refer to page 37.
w
ZOOM T/W buttons
Use these buttons to adjust the projected screen size. (They
work only when the lens unit attached to this projector has
the zooming function.)
T (Tele) : The projected screen size decreases.
W (Wide): The projected screen size increases.
For details on the operations, refer to page 35.
e
SHIFT +/– buttons
Use these buttons to adjust the height of the projection
screen when projectors are used in a stack configuration*.
(They work only when the lens unit attached to this projector
has the lens shift function.)
+:Moves the screen upwards.
– : Moves the screen downwards.
For details on the operation, refer to page 38.
Memo
* Stack configuration:
Up to three projectors can be stacked and used together (stack
configuration). This allows you to project sufficiently bright image in
a fairly large auditorium or relatively bright place.
For details, refer to page 20.
r
EXIT button
Use this button to return to the previous screen when you
are operating the menu.
For details on the operation, refer to page 43.
t
LOCK Ô UNLOCK switch
When this switch is set to “LOCK,” the ZOOM T/W but-
tons, the SHIFT +/– buttons, and the FOCUS +/– buttons
do not work. When the adjustment is needed, set the switch
to “UNLOCK.”
y
HIDE button
Use this button to turn off the video image temporarily.
Pressing it again makes the video image to resume.
For details on the operation, refer to page 36.
EN07-16QX1G_f.pm6 02.3.7, 13:3715