Filter
Top Products
46
The values in the [ ] are initial settings.
■ Options menu
• To alternate between the Options 1 menu and the Options 2
menu, press the ENTER button while the other menu is
selected.
Menu position : Adjusts the position of the displayed menu.
Press the ENTER button to go to the next sub
menu. See “Menu position menu” on page 47.
Menu display : 15sec : Turns off the menu automatically in
15 seconds after operating the menu.
ON : Not to turn off the menu
automatically. If you want to turn it off,
press the MENU button. [15sec]
Line display : 5sec : Indicates the line display when the
video input is switched. The line
display goes off automatically in 5
seconds after switching to video input.
OFF : Does not indicate the line display.
[5sec]
Keystone : Adjusts the trapezoidal distortion of the
projected image.
Press the ENTER button to go to the next sub
menu. See “Keystone menu” on page 47.
Right Left rev. : ON : Reverses the video Image right-to-left.
OFF: Not to use this function. [OFF]
RS-232C [bps] : Sets the baud rate (transmission speed).
[19200]
Sleep time [min]
: Sets the length of sleep time. A set sleep time
after input signal is depleted, the projector goes
into stand-by mode. (If you select “OFF,” the
sleep time will be cleared.) [OFF]
Back color : Specifies the background color shown when
there is no video signal. [BLUE]
Lens shift : Adjusts the lens shift.
This function takes effect only when the
installed lens has the lens shift function.
Press the ENTER button to go to the next sub
menu. See “Lens shift menu” on page 47.
Contents of the Menu (Cont.)
Menu position
Menu display
Line display
Keystone
Options 2
ENTER
5sec OFF
15sec ON
Options 1
ENTER
ENTER
Right Left rev.
RS-232C [bps]
Sleep time [min]
Back color
Lens shift
Options 1
ENTER
15 30 60 OFF
9600 19200
OFF ON
Options 2
ENTER
BLUE BLACK
■ Language menu
Language : Text on the screen can be changed to a
language other than English. Languages that
can be displayed are the following six :
(Japanese), English, Deutsch (German),
Español (Spanish), Italiano (Italian), and
Français (French). [English]
■ Color temp. menu
Color temp. : Adjusts the white color of the video image
when it becomes reddish or bluish.
The higher the color temperature, the bluer
the video image is. [6500K]
5500K : Select this when the video image is
bluish.
6500K : Select this when the video image is
reddish.
User 1 or 2 : Select this when you want to
adjust the setting in detail.
Press the ENTER button to go to the
next sub menu. See “User 1 or 2
menu” on page 47.
■ Sub brightness menu
Sub brightness : Adjusts the brightness for each R/G/B within
the range of –128 to 127.
When all R/G/B signals are adjusted equally,
you can adjust the brightness of the video
image without changing its color temperature.
[0]
Language
English
Deutsch
Español
Italiano
Français
Color temp.
ENTER
5500K
6500K
User 1
User 2
ENTER
R
G
B
Sub brightness
123
123
123
Menu Operations (Cont.)
EN39-47QX1G_f.pm6 02.3.7, 13:3846