Filter
Top Products
24
Installing the Projector (Cont.)
Effective Range and Distance of the Remote Control Unit
The remote control unit can be used as either a wireless remote control unit or a wired one.
■ Using as a wireless remote control unit
Aim the remote control unit as the remote sensor on the front or control panel of the projector.
The operable distance of the remote control unit is about 32.8 ft (10 m) for direct reception. The remote control unit can be used
by having its signal reflected on the screen. In this case, the total distance of “A + B” should be about 32.8 ft (10 m) or less. The
operable angles of the remote control unit are 50° horizontally, 15° vertically.
■ Using as a wired remote control unit
Connect the supplied remote control cable between the remote control unit and the REMOTE terminal on the connector panel
of the projector.
Using it as a wired remote control unit, you do not have to worry about the operable angle of the unit, though the operable
distance is limited by the length of the remote cable (approx. 49.2 ft (15 m)).
ZOOM
KEYSTONE
SHUTTER
DIGITAL
ZOOM
SH
IFT FOC
US
OPERATE
EXIT
ME
NU
MODE
BACK
LIGHT
ENTER
VIC1
VIC2 VIC 3
T
W
T
W
ON
OFF
LOCK
UNLOCK
RM-MQX1G REMOTE CONTROL UNIT
Z
O
O
M
F
O
C
U
S
T
W
M
E
N
U
E
N
T
E
R
E
X
I
T
V
I
C
S
E
L
E
C
T
1
2
3
K
E
Y
S
T
O
N
E
O
P
E
R
A
T
E
M
O
D
E
S
TA
N
D
B
Y
REMOTE
CONTROL
RS-232C OUT
RS-232C IN
A
15°
50°
B
Note
• When the remote control unit is used as a wired unit, its signal transmitter and projector’s remote sensor do not work.
CAUTION
• Do not extend the remote cable. Doing so could cause a malfunction of the projector.
EN17-31QX1G_f.pm6 02.3.7, 13:3724