Filter
Top Products
44
Contents of the Menu
The values in the [ ] are initial settings.
■ Information in Main menu
The following information about the input video image appears
on this screen.
VIC Slot : Shows the VIC name selected by the VIC 1,
2, or 3 button.
Switcher : Shows the selection number of the switcher
connected to the projector. “CH.0” means that
the switcher is not being used.
For details about the switcher, consult your
dealer.
● For RGB VIC
Resolution : Shows the resolution of the RGB signal
being received (Horizontal x Vertical).
It may not be displayed correctly for some
input signals.
Frequency H : Shows the horizontal frequency of the RGB
signal being received.
Frequency V : Shows the vertical frequency of the RGB
signal being received.
● For HD/HD-SDI VIC
Source : Shows one of the following formats
corresponding to the input HDTV/HD-SDI
signal.
[1035/60i, 1080/60i, 1080/50i, 1080/30p,
1080/25p, 1080/24p, 1080/25sF, 720/60p]
Lamp time : Shows the accumulated use hours of the light-
source lamp.
Contrast
Brightness
Color temp.
Gamma
Sub brightness
Menu
Image adj.
Setting
VIC menu
Options
Language
Information
VIC Slot 1
Switcher
Source
Lamp time
RGB
CH.0
1080/50i
123 h
Menu
Image adj.
Setting
VIC menu
Options
Language
Information
VIC Slot 1
Switcher
Resolution
Frequency H
Frequency V
Lamp time
RGB
CH.0
1024 x 768
48.5kHz
80 Hz
123 h
Menu
Image adj.
Setting
VIC menu
Options
Language
Information
Ex. “Main : Information” in
RGB VIC menu
Ex. “Main : Information” in
HD VIC menu
■ Image adj. menu
In this menu, the following items can be adjusted.
Contrast : The contrast of the video image being projected
is adjusted within the range of 0 to 255.
The larger value, the higher contrast is. [255]
Brightness : The brightness of the video image being projected
is adjusted within the range of 0 to 255.
The larger value, the brighter the image is.
[128]
Color temp. : Adjusts the color temperature of the video
image being projected. Make adjustment when
the video image becomes reddish or bluish.
Press the ENTER button to go to the next sub
menu. See “Color temp. menu” on page 46.
Gamma : Adjusts gamma correction within the range of
1 to 3.
The larger value, the stronger the gamma
correction is. [2]
Sub brightness : Adjusts the brightness for each RGB.
Press the ENTER button to go to the next sub
menu. See “Sub brightness menu” on page
46.
■ Setting menu
In this menu, the following items can be adjusted.
Disp.Posi. : Adjusts the position and size of the video
image being projected.
Press the ENTER button to go to the next sub
menu. See “Disp.Posi. menu” on page 47.
Resize : When the number of pixels (resolution) sought
by the video image input is smaller than that
(resolution) of D-ILA device—2048 x 1536, the
video image is then enlarged to a virtually full
screen size of D-ILA device and projected.
[Aspect]
1:1 : Does not enlarge the video image
for projection.
Panel : The video image is enlarged to the
full screen size of D-ILA device for
projection (resizing display).
Aspect : The video image is enlarged to the
full screen size of D-ILA device for
projection without changing the
original aspect ratio (resizing
display).
Contrast
Brightness
Color temp.
Gamma
Sub brightness
Image adj.
ENTER
12 3
123
123
ENTER
Disp.Posi.
Resize
Setting
1:1 Panel Aspect
ENTER
Menu Operations (Cont.)
EN39-47QX1G_f.pm6 02.3.7, 13:3844