Filter
Top Products
49
ENGLISH
Notes
• Install the filters correctly; otherwise the projector will not operate
normally.
• If the filters and/or filter covers are damaged, the projector may fail
to operate. Then, replace with new parts.
5
Reinstall the filters.
Reverse the procedure for removing. Finally, be sure to
reinstall the filter covers.
CAUTIONS
• Put on rubber gloves when using neutral detergent.
• After you have washed the filters in water, make sure the
filters are completely dry before reinstalling them.
Otherwise, electric shock or malfunction could occur.
• Do not clean the filters using a vacuum cleaner. Since the
filters are soft, it may be sucked into the vacuum cleaner or
damaged.
4
Clean the filters.
Wash the filter in water with neutral detergent, and dry it in the shade.
EN48-50QX1G_f.pm6 02.3.7, 13:3849