Filter
Top Products
page 2.20
2. Installation Digital Projection LIGHTNING 35HD User Manual
Notes
EDID handshaking
If you are using a computer DVI card or other DVI source that obeys the EDID
handshaking protocol, then the card or source will automatically configure itself to
suit the projector.
If not, then you should refer to the documentation supplied with the DVI source to
manually set the resolution to 2048 x 1080 or the nearest suitable setting.
Example: setting up the MMS 1000 multimedia switcher
The MMS multimedia switcher does not use EDID protocols, therefore you should
use the MMS menus to manually set the output resolution as follows:
• Switcher Options → Page 5 →Output Resolution → 2k x 1k (2048 x 1080)
Projector Outputs
The LIGHTNING 35HD has loop-through outputs for each input. This enables
signals to be passed through to a second projector in a stacking situation.
Ensure that DVI Repeater is ON - see Source menu, in section 4. Using the
menus.
Example
DVI video source
35HD
A in
A out
A in
35HD